Highly accurate OEM service is available. The Bio-Burden Reduction Grade PTFE Capsule Filters are made with absolute precision PTFE membranes, and each cartridge is 100% integrity tested in the manufacturing process. This ensures effective bacteriological performance and long service life. The hydrophobic nature of PTFE ensures high gas flux and bacterial removal under high humidity conditions. The inherent chemical inertness of PTFE membranes ensures broad chemical compatibility.
Welcome to buy our Bio-Burden Reduction Grade PTFE Capsule Filters. Memsep Filtration is a manufacturer who has 10 years of experience in producing filter cartridges, and a supplier who has the ability to design products and production lines independently. Memsep Filtration has been supplying filter cartridges made of various materials including but not limited to PP, PES, PTFE, Nylon, etc. to clients from all over the world for a long-term period of time.
Self-contained filters with Staubli connection at the vent, which enables on-line integrity test. The PTFE membrane provides excellent chemical compatibility and superior flow per unit area for steam-in-place and hot gas applications . All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package . PTFE filter cartridges are well-suited for critical applications where superior flow and particle or microorganism removal efficiency is required.
Fermentation Tanks
Bio Bags
Pharmaceuticals
Gas filtration
Biologics
Antibiotics Venting
Serums
1.5" | 550cm2 |
2.5" | 1100cm2 |
4" | 1800cm2 |
5" | 2400cm2 |
All materials meet the specifications for biological safety per USP Class VI-121'C for plastics.
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR.
Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU Directives 10/2011
Filter Media:PTFE
Media Support: Polypropylene
End Caps: Polypropylene
Inner Core: Polypropylene
Outer Cage: Polypropylene
Minimum burst pressure: 123.5psi(8.5barg)
Pore Size | Bubble Point |
0.1um | ≥1.7 barg(IPA/Water) |
0.2um | ≥1.4 barg(IPA/Water) |
PORE SIZE |
LENGTH |
INLET |
OUTLET |
VENT |
DRAIN |
002=0.1um 002=0.2um |
H=1.5" S=2.5" D=4" L=5" |
1T=1"TC MT=0.5"TC M6H=3/8" multistep hose barb |
1T=1"TC MT=0.5"TC M6H=3/8" multistep hose barb |
S=Staubli H=Hose barb |
S=Staubli H=Hose barb B=filling bell |