Bio-Burden Reduction Grade PES Filter Cartridge can be customized as an OEM product. In the field of PES cartridges,the use of asymmetric PES membranes can provide a minimum of 0.04µm, with a minimum bubble point of 31.9 PSI (2.2barg) IPA.all products are in compliance with the FDA as well as the EU10/2011 directives. All cartridges can be tested for integrity and have an pore size of 0.04µm, 0.1 µm, 0.2µm, 0.45µm, 0.65µm.
We invite you to contact us for a quotation on a wide range of filter cartridges. Among the many types of media:PES cartridges,PES single layer cartridges,PES asymmetric cartridges,PES capsule filters, etc. All cartridges can be tested for integrity and have an pore size of 0.04µm, 0.1 µm, 0.2µm, 0.45µm, 0.65µm.
The bio-burden reduction polyethersulfone membrane cartridges are designed to produce product sterility. The filters are constructed of single layer hydrophilic polyethersulfone membrane in all polypropylene construction. It offers broad chemical compatibility, high flow rate at low pressure drop, and low extractables .The polyethersulfone is particular suitable for the filtration of products that contains substances absorb to the membrane itself. The low protein binding characteristics of polyethersulfone makes it a good choice for the filtration of valuable protein solutions such as vaccines and biologicals. Our Bio-Burden Reduction Grade PES Filter Cartridge are durable and come with standardized dimensions.
·Cell Culture Media
·Large Volume Parenterals(LVP's)
·Pharmaceutical Bulk Chemical Solutions
·Diagnostics
·Blood and Serum Fractions
·Purified Water
·Beer, Wine and Spirits
·Juice & Soft Drinks
·Bottled Water
Poresize |
Minimum Bubble point |
0.04um |
31 . 9PSI(2.2barg),IPA |
0.1um |
24 . 7PSI(1.7barg),IPA |
0.2um |
51PSI(3.5barg) |
0.45um |
35PSI(2.4barg) |
0.65um |
22PSI(1.5barg) |
Filter Membrane:Polyethersulfone (PES) Membrane
Media Support: Polypropylene
End Caps: Polypropylene
Inner Core:Polypropylene
Outer Cage:Polypropylene
Sealing Method:Thermal Bonding
O-rings: Buna, Viton(or FKM), EP, Silicone,Encapsulated Silicone,Encapsulated Viton (or FKM)
Filtered Hot Water 90 ℃(194°F), 30 minutes,multiple cycles,max 3 psid forward flow
Autoclave 121℃(250"F),30 min,multiple cycles
In-line Steam 135℃(275°F),30 min,multiple cycles
Differential Pressure
·Forward 50 psid (3.4 bard)at 20℃(68°F)
·Reverse 40 psid (2.7 bard)at 20℃(68' F)
Operating Temperature 82 ℃(180'F) at 10
psid(0.69 barg) in water
Recommended Changeout Pressure:35psid(2.4barg)
5 to 40 inches (12 .7 to 101 .6 cm) nominal ,Outside Diameter:2 .70 inches (7 .0 cm) nominal