General Filtration PES Filter Cartridge can be customized as an OEM product. PES cartridges are constructed with a single layer of asymmetric polyethersulfone membranes, and each cartridge is tested for 100% integrity in the manufacturing process. Each cartridge is 100% integrity tested in the manufacturing process to ensure effective removal of micro-particles and harmful micro-organisms from liquids. All components of the product are made of high safety materials. Polyethersulfone cartridges offer broad chemical compatibility. High throughput and long service life. PES filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.04µm, 0.1µm, 0.2µm, 0.45µm, 0.65µm, 0.80µm and 1.2 micron is required.
PES filter cartridges are highly retentive hydrophilic .PES membrane filters that have been specially designed for critical applications . The PES membrane in an allpolypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges .No adhesives, binders, or surfactants are used in the manufacturing process and all car tridges are rinsed with high-purity water to reduce extractables and downtime .The hydrophilic PES membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste. PES filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.04µm, 0.1µm, 0.2µm, 0.45µm, 0.65µm, 0.80µm and 1.2 micron is required. If you want to know more about General Filtration PES Filter Cartridge, please contact us.
·Bottled Water
·Process Water
·Vinegar
·Aseptic Packaged liquids
·Beer, Wine and Spirits
·Juice,Soft Drinks,Edible Oils
·Optical Disk manufacturing
·Hard Disk manufacturing
·Optical Coatings
·Bulk Chemicals
·Pharmaceutical intermediates
Pore size | Minimum Bubble point |
0.05um | 31.9 psig (2.2bar),IPA |
0.1um | 24.7 psig (1.5bar),IPA |
0.2um | 45psig(3.1 bar) |
0.45um | 24 psig(1.7bar) |
0.65um | 19 psig(1.3 bar) |
0.8um | 17 psig(1.2 bar) |
1.2um | 11.6 psig(0.8 bar) |
5 to 40inches(12.7 to 101.6 cm)nominal
Outside Diameter:2.70 inches (7.0 cm) nominal
DifferentiaI Pressure
·Forward 50 psid (3.4 bard) at 20℃(68F)
·Reverse40 psid (2.7 bard) at 20 ℃(68℉)
Operating Temperature 82 ℃C(180°℉F) at 10 psid(0.69 barg) in water
Recommended Changeout Pressure:35psid(2.4barg)
All components meet the specifications for biological safety per USP Class VI-121'C for plastics.
Filter Membrane:Polyethersulfone (PES) Membrane
Media Support: Polypropylene
End Caps: Polypropylene
Inner Core:Polypropylene
Outer Cage: Polypropylene
Sealing Method:Thermal Bonding
O-rings: Buna, Viton(or FKM), EP, Silicone,
Encapsulated Silicone,
Encapsulated Viton (or FKM)
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations,21CFR.
Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU Directives 10/2011
Filtered Hot Water 90 ℃(194°F), 30 minutes,multiple
cycles,max 3 psid forward flow
Autoclave 121℃ (250°℉), 30 min, multiple cycles
In-line Steam 135℃(275°F),30 min,multiple cycles
PORE SIZE |
LENGTH |
ENDCAPS |
SEAL |
CONNECTION SUPPORT |
0x5=0.05um 001=0.1um 002=0.2um 004=0.45um 006=0.65um 008=0.8um 012=1.2um |
05=5" 10=10" 20=20" 30=30" 40=40" |
7=226/fin 6=226/flat 0=222/flat 5=222/fin F=DOE 2=224/fin 3=224/flat 4=222/fin (3luggs) 8=222/flat(3luggs) x=213 Inter o-ring |
B=Buna-N E=EPDM S=Silicone V=Viton TV=Fep encapsulated viton TS=Fep encapsulated silicone |
S=With SS reinfocement |